HVAC-chiller- coolant is a high efficient heat transfer fluid for the chiller and HVAC system. HVAC-chiller- coolant is not only acts as a carrier of the heat energy but also the protect chillers and their associated cooling systems against corrosion, scale & algae, thus allowing maximum heat transfer. HVAC-chiller- coolant contains multi-Metal Corrosion Inhibitors, thus the life of the chiller extends and also minimizes downtime. HVAC-chiller- coolant does not allow scale and sludge to deposit to form a film easily and keep them in circulation thus getting maximum heat transfer rate & eliminates the Blockages.
HVAC-chiller- coolant is a low viscosity product so reduces the significant energy consumption during the pumping/ circulation. It is a high Thermal conductivity product so getting a better heat transfer rate. It does not solidify at sub zero temperature so eliminates fluid expansion and pipe bursting . HVAC-chiller-coolant has a bitter taste additive to prevent animal consumption. It is a non volatile and non-hazardous during the storage.
Typical Properties :
| PRODUCT |
HVAC- Chiller- Coolant |
| Composition : |
Mixture of glycol, corrosion inhibitor, anti oxidant, biocides, |
| Appearance |
colored liquid material |
| Odour |
Peculiar |
| Density |
1.07-1.085 |
| Solubility |
Completely soluble in water. |
| Foaming |
NIL |
| Reserve alkalinity(Min) |
10 |
| Boiling Point: |
> 105 degree centigrade |
| pH |
8.5 — 9.6 |
| Freezing point: |
<- 32 •C |
Application :
HVAC-chiller- coolant is compatible with all other standard coolants and also with metallic and non-metallic parts of the equipment. The product should be used without any type of the dilution, means it is a ready to use so no care is to be taken before use. It is also completely tested before dispatch. For toping purpose always use de-ionized water.
HVAC-chiller- coolant can be use in the following applications: -
• HVAC system
• Thermal Energy Storage
• Processing Cooling/Heating
• Line Heaters
• Snow Melting
• Refrigeration Systems
• Plastic Extrusion
The product should not be mix with antifreeze coolant of automotive, tape water, methanol based Coolant, and torch coolant.
The manufacturer can also supply the automobile and torch coolant. for cleaning of the cooling system always use plazclean of APL.
ADVANCE PETROCHEMICALS LTD. can supply HAVC- coolant as per customer specification.
Packing : In 5,25. & 210 Kg. M.S./HDPE Drum.
ADVANCE PETROCHEMICALS LIMITED
36, KOTHARI MARKET, DIWAN BALLUBHAI ROAD, KANKARIA, AHMEDABAD-380022.
GUJARAT - INDIA.
TEL : +91-79-25711218, 25715196, 25733224, 25454795 FAX : 25710027, 25454586
EMAIL : info@advancepetro.com WEBSITE : WWW.advancepetro.com